This site uses cookies for monitoring purposes. If you continue using this site, you accept this cookie policy.

Amida 710

Amida 710Amida 710


The Amida 710, which was probably launched in the early 1970ies, is a modern decorated movement with a completely frosted finish, which could have been launched in the 1980 as well.

Its construction is like on Roskopf movements: On the movement side, there's no direct connection to the hands works, which is here driven from the mainspring barrel.

The three-leg (modern shape) ring balance is beared in two Incabloc shock protection systems and beats slowly with 18000 A/h.

The hairspring is connected to a moveable stud and can be regulated in its effective length on the hairspring key only.

main platemain plate

The construction of this pillar movement is remarkable, since it's only one-storied, which results in a very flat (only 3.8mm in height) building, being perfectly suitable for elegant waches.

Even a center second indication would be possible - on the plates, there are already the preparations for the bushings - on the movement side, there's even a jewel, which is currently unused.

dial side viewdial side view

On the dial side, which looks like being made by a robot, you see the yoke winding system.

Unlike true Roskopf movements, the Amida 710 is a bit special: The hands are not directly driven by the mainspring barrel, but the mainspring barrel drives the changing wheel, which consists of two concentric gears with a friction coupling. The lower wheel is connected with the mainspring barrel, the upper wheel with the cannon pinion and the hour wheel.


 Technical data

Number of jewels17
EscapementAnchor with pallets
Shock protection(s)Incabloc
Balance cock directioncounterclockwise
Hairspring studmoveable
Regulator typeHairspring key
Movement constructionFork
Escapement wheel, Fourth wheel, Third wheel, Large driving wheel, Mainspring barrel
Construction typepillar construction
Bridge shapefull plate including esc.wheel, 5 gears
Winding mechanismyoke
Setting lever spring3 holes
FunctionsHour, minute
Beats per hour18000
Size101/2''' (measured: 23,75 mm)
Image in Flume Werksucher K3 30
Amida 710AmidaAmida71010 1/2''''''Amida 71017 Jewels, 10 1/2'''''', 18000 A/h


Lab details

The movement came in fair condition into the laboratory, but was nevertheless cleaned and oiled.


Timegrapher results

crown rightcrown right crown topcrown top crown leftcrown left crown bottomcrown bottom 
dial topdial top dial bottomdial bottom 

vertical positions
12 up  -15 seconds/day
3 up  -38 seconds/day
6 up  +6 seconds/day
9 up  +4 seconds/day
horizontal positions
dial down  -10 seconds/day
dial up  -30 seconds/day
timegrapher measurings


Usage gallery

Amida mens' watchAmida mens' watch