Description
The American tonneau-shaped caliber Hamilton 911 is a fine example of the high-quality movements once manufactured in the USA. Unfortunately, this watchmaking industry did not survive.
The movement, which is almost rectangular in shape, is of the American size 22/0s, comparable to a 5-ligne movement such as the AS 976.
Of course, the execution is very well; all important bearings are fitted with deep-red synthetic rubies, even the minute wheel bearing.
The Hamilton 911 utilizes a traditional gear train layout comprising the mainspring barrel, the directly driven center minute wheel, third wheel, fourth wheel, and escape wheel.
A Swiss pallet lever escapement is employed.
The gold-colored screw balance is outstanding in terms of both aesthetics and technology, operating at a frequency of 18,000 semi-oscillations per hour. Attached to it is a Breguet overcoil hairspring, the effective length of which is adjusted using a long regulator arm and the scale on the balance cock.
On the dial side, where the hour wheel is missing in this particular example, one can clearly see the yoke winding mechanism and the fact that the dial-side bearing for the seconds wheel is positioned above the escape wheel. This arrangement was necessary to accommodate a larger escape wheel.
Technical data
| Manufacturer: | Hamilton |
| Caliber: | 911 |
| Size: | 22/0s (measured: 12,3 x 15,8mm) |
| A/h: | 18000 |
| Number of jewels: | 17 |
| Escapement: | Pallet lever |
| Balance types: | monometallic screw balance (two legs) |
| Construction: |
|
| Setting lever spring: | 3 holes |
| Mentioning in literature/catalogs (years): | 1953 |
| Inventory number: | 25004 |




