Venus 54

Venus 54 | - The Movement Archive

Venus 54


The Venus 54 is an ellipse-shaped ladies' watch movement with a swiss pallet lever escapement and 15 rubies.

Video on YouTube

It is a direct relative to the Venus calibers 51 to 53; the differences between them are yet unknown.
These kind of form movements were only used for a short peroid of time.

Venus 54: motion works

motion works

The gear construction is a very typical one. The ring balance is probably still be made of bimetal, the two cuts which allow the expanding of the half-wheels is already missing; there’s only a lookalike small cutoff on top of the balance ring.

Venus 54: side view of the motion works

side view of the motion works

The balance is not yet shock protected and beats with contemporarily slow 18000 A/h.

Venus 54: main plate

main plate

On the Venus 54, the bearing rubis are of high quality. You see this on the fact, that they are not flat, but contain small oil reservoirs which protect the axles.

Venus 54: Venus 54 dial side

Venus 54 dial side

This movement has got a yoke winding system. It’s setting lever spring has got a characteristical cutout in a quad shape.

Technical data

Size:6 1/2''' (measured: 14,7 x 25,0mm)
Number of jewels:15
Escapement:Pallet lever
Balance types: bimetallic screw balance
Shock protection(s): none
Balance bearing / direction hairspring:Clockwise
Moveable stud:no
Adjust mechanism:Long regulator arm
  • lever
  • escape wheel
  • seconds wheel, third wheel, center minute wheel
  • mainspring barrel
Winding mechanism:yoke winding system
Setting lever spring:3 hole(s)
References: Flume: 1947 128

Usage gallery

Venus 54: unmarked ladies' watch

unmarked ladies' watch

Other movements from Venus